Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for HydroTherm B - Series
Summary of Contents for HydroTherm B - Series
- Page 1 B - SERIES TOWEL RAIL ver. 2021-4...
-
Page 2: Standard Specifications
Timeless elegance. B - SERIES TOWEL RAIL Characterised by classical features, the B-Series brings timeless elegance into your bathroom. A symbol of sophisticated style, the B Series adds designer luxury to traditional bathrooms. B MODEL B MODEL FREESTANDING Standard Height... -
Page 3: Specifications
100 Watts 150 Watts 1000mm B/700 1000mm 700mm 770mm 150 Watts 200 Watts B/800 1000mm 800mm 870mm 150 Watts 200 Watts 10 YEAR 3 YEAR PROUDLY AUSTRALIAN CONSTRUCTION & FINISH ELECTRIC ELEMENT MADE AND OWNED MANUFACTURERS WARRANTY MANUFACTURERS WARRANTY www.hydrotherm.com.au... - Page 4 100 Watts 150 Watts 1000mm BFS/700 1000mm 700mm 770mm 150 Watts 200 Watts BFS/800 1000mm 800mm 870mm 150 Watts 200 Watts 10 YEAR 3 YEAR PROUDLY AUSTRALIAN CONSTRUCTION & FINISH ELECTRIC ELEMENT MADE AND OWNED MANUFACTURERS WARRANTY MANUFACTURERS WARRANTY www.hydrotherm.com.au...
-
Page 5: Installing Brackets
BOTTOM OF THE UNIT FOR CORRECT HEAT TRANSFER Hydrotherm take pride in the fact that all rails are individually hand made. Due to this fact some measurements may not be exact. PLEASE READ INSTRUCTIONS CAREFULLY and do not force towel rail into bracket if position of wall flange is not accurate. - Page 6 Timeless elegance. WIRING OPTIONS - WALL The Hydrotherm B - Series Electric Towel rails come pre-filled with water, and with electric elements already fitted (standard on the left unless otherwise specified). Refer Hard Wire Attachment HARD WIRED VERSION PLUG IN VERSION REQUEST ONLY The cable may be hard-wired into the wall with an element Plug is supplied separately with element cable (1200mm long).
- Page 7 HARD WIRING IP55 Hydrotherm recommends that all hard-wired heated towel rails be connected to a light switch or timer. Connecting hard-wired heated towel rails to a light switch or timer will prolong the Elements have a built in thermostat and life of the electric element and reduce energy consumption.
- Page 8 Turn the towel rail the right way up, position back into brackets and refit grub screws to secure. Please note: Hydrotherm advise that the unit be removed from the wall and turned upside down to ensure that water does not spill. Ensure element always remains at bottom of towel rail.
-
Page 9: Installation
Simply wiping and drying with a soft cloth will maintain the finish. Never use abrasives of any nature as these will scratch and wear the coating. Follow guidelines as set out above. ANTIQUE FINISHES: Refer to specific guidelines. www.hydrotherm.com.au... - Page 10 ELECTRIC MODEL Electric connection must be installed by a qualified electrician. All Hydrotherm Towel Rails carry an IPX5 rating for use in wet areas. If the electrical cable is damaged, the entire element must be replaced. When connecting, element must be positioned at the bottom of the towel rail.
Need help?
Do you have a question about the B - Series and is the answer not in the manual?
Questions and answers