HydroTherm B Series Quick Start Manual

HYDROTHERM
B - SERIES TOWEL RAIL
B Model - Mini -
Height: 500mm(h) + Hard Wire
Width: 600mm (Standard)
500, 600,700, 800mm (custom)
Element: 40 watt - 70 watt
FEATURES
Replaceable Element Heating element easily replaced
Classic Design Classical features of the B-Series bring a timeless
elegance to your bathroom
Copper Tube Ensures ultimate thermal conductivity and
radiation.
Note: arms do not move independently
Local Product 100% Australian owned and manufactured
Tel: +61 3 9464 4622
Warning:
This appliance is not intended for use by young children or infirm persons without supervision.
Young children should be supervised to ensure they do not play with this appliance
Caution:
Towel Rail must be installed so that the bottom rail is at least 600 mm above the oor to avoid a hazard for children.
The cord extension set must be positioned so that it is not subject to splashing or ingress of moisture .
The supply shall have means for disconnection with an air gap in all active conductors incorporated in the xed
wiring according to the Wiring Rules in AS/NZS 3000:2000
Manufactured by Hydrotherm Australia , 96 Commercial Drive Thomastown Victoria 3074
Fax: +61 3 9464 4722
B Model - Triple Tube
Width: 600mm (Standard)
500, 600,700, 800mm (custom)
Element: 10 watt - 20 watt
SPECIFICATIONS
Recommended use
Materials
Element
Power Cable
Safety rating
Finish
Standards
Web: www.hydrotherm.com.au Email: info@hydrotherm.com.au
600
Domestic, hotel and commercial
Made entirely from Copper Tube with Brass
Fittings
Low wattage, replaceable water element
Bottom of unit (Only) Left or Right Side -
IPX5 (allows for installtion in zone 1 & 2 of
bathroom)
High Polish Chrome Plate
AS/NZS:3350
CAUTION
c