Page 2
Perfects minimalist design and practicality. HF - SERIES TOWEL RAIL The HF Series combines sleek design and superb functionality. Its additional clustered bars provide enhanced towel warming and drying. HF Series models can also be used to deliver ambient bathroom heating. HF2 MODEL...
1200mm 0.33 - 0.58kW 0.33 - 0.58kW HF2/800 1200mm 800mm 840mm 0.33 - 0.58kW 0.33 - 0.58kW HF2/900 900mm 940mm 1200mm 10 YEAR 3 YEAR PROUDLY AUSTRALIAN CONSTRUCTION & FINISH ELECTRIC ELEMENT MADE AND OWNED MANUFACTURERS WARRANTY MANUFACTURERS WARRANTY www.hydrotherm.com.au...
Page 4
1650mm 0.63 - 0.88kW 0.63 - 0.88kW HF3/800 1650mm 800mm 840mm HF3/900 900mm 940mm 0.63 - 0.88kW 0.63 - 0.88kW 1650mm 10 YEAR 3 YEAR PROUDLY AUSTRALIAN CONSTRUCTION & FINISH ELECTRIC ELEMENT MADE AND OWNED MANUFACTURERS WARRANTY MANUFACTURERS WARRANTY www.hydrotherm.com.au...
Page 5
2100mm 0.93 - 1.18kW 0.93 - 1.18kW HF4/800 2100mm 800mm 840mm HF4/900 900mm 940mm 0.93 - 1.18kW 0.93 - 1.18kW 2100mm 10 YEAR 3 YEAR PROUDLY AUSTRALIAN CONSTRUCTION & FINISH ELECTRIC ELEMENT MADE AND OWNED MANUFACTURERS WARRANTY MANUFACTURERS WARRANTY www.hydrotherm.com.au...
THIS APPLIANCE. Hydrotherm take pride in the fact that all rails are individually hand made. Due to this fact some measurements may not be exact. PLEASE READ INSTRUCTIONS CAREFULLY and do not force towel rail into bracket if position of wall flange is not accurate.
Perfects minimalist design and practicality. PIPE INSTALLATION PIPED INTO THE WALL 1/2 Inch Copper Tails 40MM 85MM PIPED INTO THE FLOOR 120MM 1/2 Inch 85MM Copper Tails www.hydrotherm.com.au...
Simply wiping and drying with a soft cloth will maintain the finish. Never use abrasives of any nature as these will scratch and wear the coating. Follow guidelines as set out above. ANTIQUE FINISHES: Refer to specific guidelines. www.hydrotherm.com.au...
Page 9
ELECTRIC MODEL Electric connection must be installed by a qualified electrician. All Hydrotherm Towel Rails carry an IPX5 rating for use in wet areas. If the electrical cable is damaged, the entire element must be replaced. When connecting, element must be positioned at the bottom of the towel rail.
Need help?
Do you have a question about the HF Series and is the answer not in the manual?
Questions and answers