Advertisement
Quick Links
Quick Start Guide
ESUG4P-PG2-D*
Introduction
Welcome to KBC Network's Quick Start Guide for
the ESUG4P-PG2, 6 port, PoE switch. This
document provides some quick tips on how to
get up and running. For more detailed
information see the Downloads section below.
Features:
IEEE802.3at on 4 ports
•
Dual redundant power input
•
Alarm output for power supply
•
Full & half duplex operation
•
MDI/MDI-X
•
IP30 casing
•
Downloads
Installation manual
Other features and functions are described in the
unabridged manual:
http://www.kbcnetworks.com/esug4p-pg2-
series/network-products/esug4p-pg2-series
Specification sheet:
http://www.kbcnetworks.com/esug4p-pg2-
series/network-products/esug4p-pg2-series
QSG_ESUG4P-PG2-Rev1112
Copyright © KBC Networks Ltd. 2011
Industrial Ethernet Switch
System Contents
Qty Description
1
Ethernet switch fitted with DIN rail mount.
2
Wall-mount brackets with screws.
1
Pluggable terminal block.
Equipment Required for Physical
Deployment
You will need a 50 - 57Vdc power supply, these
are supplied separately.
www.kbcnetworks.com
Advertisement
Related Manuals for KBC ESUG4P-PG2-D Series
Summary of Contents for KBC ESUG4P-PG2-D Series
- Page 1 Introduction System Contents Equipment Required for Physical Deployment Welcome to KBC Network’s Quick Start Guide for Qty Description the ESUG4P-PG2, 6 port, PoE switch. This You will need a 50 - 57Vdc power supply, these document provides some quick tips on how to Ethernet switch fitted with DIN rail mount.
- Page 2 Visit our website http://www.kbcnetworks.com No power to the unit Connect a 50 - 57Vdc power supply, contact your nearest KBC office or dealer: PWR2 Power is supplied to the unit (supplied separately). No power to the unit...
Need help?
Do you have a question about the ESUG4P-PG2-D Series and is the answer not in the manual?
Questions and answers