Advertisement
Quick Links
Quick Start Guide
ESUL5P-D*
0
Introduction
Welcome to KBC Network's Quick Start Guide for
the ESUL5P, 5 port, PoE switch. This document
provides some quick tips on how to get up and
running. For more detailed information see the
Downloads section below.
Features:
IEEE802.3.af on 4 ports
•
Dual redundant power input
•
Alarm output for power supply
•
Full & half duplex operation
•
MDI/MDI-X
•
IP30 casing
•
Downloads
Installation manual
Other features and functions are described in the
unabridged manual:
http://www.kbcnetworks.com/esul5p-
series/network-products/esul5p-series
Specification sheets:
http://www.kbcnetworks.com/esul5p-
series/network-products/esul5p-series
QSG_ESUL5P-D-Rev1112
Copyright © KBC Networks Ltd. 2011
Industrial Ethernet Switch
System Contents
Qty Description
1
Ethernet switch fitted with DIN rail mount.
2
Wall-mount brackets with screws.
1
Pluggable terminal block.
Equipment Required for Physical
Deployment
You will need a 48Vdc power supply, these are
supplied separately.
www.kbcnetworks.com
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for KBC ESUL5P-D
Summary of Contents for KBC ESUL5P-D
- Page 1 Introduction System Contents Equipment Required for Physical Deployment Welcome to KBC Network’s Quick Start Guide for Qty Description the ESUL5P, 5 port, PoE switch. This document You will need a 48Vdc power supply, these are provides some quick tips on how to get up and Ethernet switch fitted with DIN rail mount.
- Page 2 Connect the DIN rail or wall-mount Visit our website http://www.kbcnetworks.com Power is supplied to the unit brackets as required. contact your nearest KBC office or dealer: No power to the unit Connect a 48Vdc power supply, (supplied Power is supplied to the unit separately).
Need help?
Do you have a question about the ESUL5P-D and is the answer not in the manual?
Questions and answers