Onkyo TX-DS676 Instruction Manual page 56

Using a Macro function
1, 2
1
56
1. Press and hold down the corresponding MODE button and
1, 2
2. Press the MACRO MODE button again.
1
1. Press and hold down any one of the MODE buttons and
2. Press the MACRO DIRECT button again.
Note:
•
•
Erasing a learned remote controller button
operation from the MACRO MODE buttons
press the MACRO MODE button, then release the buttons.
When you press the MODE button, the SEND/LEARN indica-
tor lights up. When you press the MACRO MODE button, the
indicator turns off. When you release the buttons, the indicator
flashes once.
The SEND/LEARN indicator flashes twice slowly. The learned
operation is erased.
Erasing a learned remote controller button
operation from the MACRO DIRECT button
press the MACRO DIRECT button. Then release the but-
tons.
When you press the MODE button, the SEND/LEARN indica-
tor lights up. When you press the MACRO DIRECT button, the
indicator turns off. When you release the buttons, the indicator
flashes once.
The SEND/LEARN indicator flashes twice slowly. The learned
operation is erased.
If you do not press any button for more than 30 seconds, the SEND/
LEARN indicator flashes three times quickly, then the RC-392M exits
Learning mode. Resume Step 1.
If you press a wrong button in Step 2, you may have overwritten the
memory of the button you pressed.