Onkyo TX-DS676 Instruction Manual page 50

Using the remote controller
50
Note:
First connect an Onkyo CD player using the zconnection.
(See page 7.)
1. Press the MODE CD button.
2. Press the desired CD operation button.
MODE CD
CD
operation
buttons
Numeric keys
Note:
Make sure that you point the transmission part on the remote con-
troller toward the sensor area on the DVD player.
1. Press the MODE DVD button.
2. Press the desired DVD operation button.
POWER
ON/STNBY
MODE DVD
DVD SET
MENU
DVD
operation
buttons
Numeric keys,
ENT button
Note:
The ENT button on the right below the numeric keys has the same
function as "ENTER" of the ENTER/cursor button.
Controlling an Onkyo CD player
TRACK : Selecting a track
DISC : Selecting a disk in the CD changer
: Down
: Up
: Playback
: Stop
: Rewind
: Fast forward
: Pause
EJECT r : Eject
0, 1~9, +10 : Numeric keys
You may also use the following buttons:
VOL : Adjusting the volume level of the
TX-DS777/TX-DS676
MUTING : Muting the sound from the TX-DS777/
TX-DS676
Controlling an Onkyo DVD player
POWER ON/STNBY
: Turning the power on and off to the DVD
player
DVD SET : DVD setup
DVD player on-screen button
MENU : Displaying the menu
: Moving the cursor
ENTER : Confirming the selection
RETURN : Return
DVD player buttons
: Down
: Up
: Playback
: Stop
: Rewind
: Fast forward
: Pause
EJECT r : Eject
0, 1~9, +10 : Numeric keys
ENT : Confirm
You may also use the following buttons:
VOL : Adjusting the volume level of the
TX-DS777/TX-DS676
MUTING : Muting the sound from the TX-DS777/
TX-DS676