Specifications - Onkyo TX-DS575x Instruction Manual

Onkyo a/v receiver instructions manual
Hide thumbs Also See for TX-DS575x:
Table of Contents

Advertisement

Specifications
AMPLIFIER SECTION
Continuous Average Power
output (FTC)
All channels:
70 watts per channel min. RMS at
8 ohms, 2 channels driven from 20 Hz
to 20 kHz with no more than 0.08%
total harmonic distortion.
90 watts min. RMS at 6 ohms, 2 chan-
nels driven from 1 kHz with no more
than 0.1% total harmonic distortion.
Continuous Power output (DIN) 100 watts
Maximum Power output (EIAJ) 130 watts
Total Harmonic Distortion:
0.08% at rated power (Front)
IM Distortion:
0.08% at rated power (Front)
Damping Factor:
60 at 8 ohms (Front)
Input Sensitivity and Impedance
PHONO:
2.5 mV, 50 kohms
LINE (CD, TAPE, DVD,
VIDEO 1, 2, 3):
300 mV, 50 kohms
MULTICHANNEL INPUT
(FRONT
L/R,
SUR-
ROUND L/R, CENTER): 300 mV, 50 kohms
(SUBWOOFER):
53 mV, 50 kohms
COAXIAL 1, 2 (DIGITAL): 0.5 Vp-p, 75 ohms
Output Level and Impedance
Rec out (TAPE, VIDEO 1):
300 mV, 2.2 kohms
Pre out (SUBWOOFER):
1 V, 2.2 kohms
Phono Overload:
70 mV RMS at 1 kHz, 0.5% T.H.D.
Frequency Response:
5 Hz to 100 kHz, +1dB, –3dB
RIAA Deviation:
20 Hz to 20 kHz, 0.8 dB
Tone Control
Bass:
10 dB at 100 Hz
Treble:
10 dB at 10 kHz
Signal-to-Noise Ratio
Phono:
80 dB (IHF A, 5 mV input)
CD/Tape:
100 dB (IHF A)
VIDEO SECTION
Input sensitivity/Impedance
(DVD, VIDEO 1, 2, 3)
VIDEO (Composite):
1 Vp-p, 75 ohms
S-VIDEO (Y signal):
1 Vp-p/75 ohms
Output Level/Impedance
(VIDEO 1, MONITOR)
VIDEO (Composite):
1 Vp-p, 75 ohms
S-VIDEO (Y signal):
0.28 Vp-p/75 ohms
TUNER SECTION
FM
Tuning Range:
87.5 — 108.0 MHz
Usable Sensitivity
Mono:
11.2 dBf, 1.0 V (75 ohms)
Stereo:
17.2 dBf, 2.0 V (75 ohms)
50 dB Quieting Sensitivity
Mono:
17.2 dBf, 2.0 V (75 ohms)
Stereo:
37.2 dBf, 20 V (75 ohms)
Capture Ratio:
2.0 dB
Image Rejection Ratio
U.S.A. & Canadian models: 40 dB
Other area models:
85 dB
5 at 6 ohms
5 at 6 ohms
IF Rejection Ratio:
90 dB
Signal-to-Noise Ratio
Mono:
76 dB
Stereo:
70 dB
Alternate Channel Attenuation: 55 dB
Selectivity:
50 dB (DIN)
AM Suppression Ratio:
50 dB
Total Harmonic Distortion
Mono:
0.2%
Stereo:
0.3%
Frequency Response:
30 Hz — 15 kHz, 1.0 dB
Stereo Separation:
45 dB at 1 kHz
30 dB at 100 Hz — 10 kHz
AM
Tuning Range
U.S.A. & Canadian models: 530—1,710 kHz (10 kHz steps)
European & Australian
522—1,611 kHz (9 kHz steps)
models:
Worldwide models:
531—1,602 kHz (9 kHz steps),
530—1,710 kHz (10 kHz steps)
Usable Sensitivity:
30 V
Image Rejection Ratio:
40 dB
IF Rejection Ratio:
40 dB
Signal-to-Noise Ratio:
40 dB
Total Harmonic Distortion:
0.7%
GENERAL
Power Supply:
AC 120 V, 60 Hz
AC 230 V, 50 Hz
AC 220-230 V and 120 V switchable,
50/60 Hz
AC 220 V, 50/60 Hz
Power Consumption:
3.9 A
325 W
Dimensions (W
H
D):
435
17-1/8"
Weight:
12.5 kg, 27.6 lbs. (AC 120 V, 60 Hz model)
13.2 kg, 29.1 lbs. (other models)
REMOTE CONTROL
Transmitter:
Infrared
Signal range:
Approx. 5 meters, 16 ft.
Power supply:
Two "AA" batteries (1.5 V
Specifications and features are subject to change without notice.
Power supply and voltage vary depending on the area in which the unit is
purchased.
175
390 mm
6-7/8"
15-3/8"
2)
41

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents