Onkyo TX-DS575x Instruction Manual page 33

Using the remote controller
MD
operation
buttons
Numeric keys,
ENT button
MODE
AUDIO
TAPE
operation
buttons
Controlling an Onkyo MD recorder
Note:
Make sure that you point the transmission part on the remote con-
troller toward the sensor area on the MD recorder.
1. Press the MODE MD/AUX button.
2. Press the desired MD operation button.
MODE MD
Turning the power on and off to the MD recorder
ON/STNBY
MD operation buttons
REC
EJECT
1~9, +10
ENT
You may also use the following buttons:
VOL q/u
MUTING
Controlling an Onkyo tape deck
Note:
First connect an Onkyo tape deck using the
page 9.)
1. Press the MODE AUDIO/TAPE button.
2. Press the desired tape deck operation button.
TAPE operation buttons
REC
You may also use the following buttons:
VOL q/u
MUTING
MODE SAT, CABLE, VCR, and TV buttons
No preset codes are programmed into the MODE SAT, CABLE,
VCR, and TV buttons. You can use these buttons to program
MODE SAT,
remote controller signals of other devices. (See page 34.)
CABLE, VCR,
You may use the following buttons:
TV
VOL q/u
MUTING
: Turning on or standby the power to the MD
recorder
: Track Down
: Track Up
: Playback
: Stop
: Fast reverse
: Fast forward
: Record
: Pause
: Eject
: Numeric keys
: Confirm
: Adjusting the volume level of the TX-
DS575X
: Muting the sound from the TX-DS575X
connection. (See
: Playback
: Stop
: Fast rewind
: Fast forward
: Recording/pause
: Reverse play
: Adjusting the volume level of the TX-
DS575X
: Muting the sound from the TX-DS575X
: Adjusting the volume level of the TX-
DS575X
: Muting the sound from the TX-DS575X
33