Balboa BP600 Manual page 3

Codes and Compliance
All of the electrical wiring methods and materials used to
complete the electrical installation of the BP control systems
must be in accordance with the National Electrical Code or the
Canadian Electric Code, as well as any local electrical codes in
effect at the time of installation.
The selection of electrical materials required to accomplish
this installation and the installation of the control system must
be made by, or be under the direct supervision of, a qualified
electrician.
The systems herein are classified as a "continuous duty
appliance" and is intended primarily for installation at a
single family dwelling. The installation recommendations and
instructions contained in this manual are directed solely toward
these issues.
WARNING!
If there is any doubt whether the system that you are repairing
does not have these features, contact a licensed, qualified
Do not attempt to modify the wiring
electrician.
yourself.
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417, 834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42217 C
BP Diagnostic Service Manual
This manual is for general servicing of BP Control systems,
and troubleshooting typical spa control system problems. For
detailed component settings and wiring configurations, service
technicians should obtain the latest technical manuals (Tech
Sheets) available.
Contact your Balboa Water Group representative or BWG's
technical support for technical materials. Or, visit Balboa Water
Group at:
http://www.balboawatergroup.com/
3