Balboa TP600 Quick Reference Manual
By silver spas
Hide thumbs
Also See for TP600:
- User manual ,
- User interface and programming reference manual (26 pages) ,
- Manual (7 pages)
Advertisement
Advertisement
Table of Contents
Related Manuals for Balboa TP600
Summary of Contents for Balboa TP600
- Page 1 Quick Reference Guide JETS LIGHT HEAT...
- Page 2 Quick Reference Guide SILVER SPAS LIMITED 48B Porana Road, Wairau Valley Auckland 0627 New Zealand • 0800 772 725 • www.silverspas.co.nz...
- Page 3 VL801D Quick Reference Guide INITIAL START-UP Sleep Mode heats the spa to within 20 °F/10°C of the set temperature only SLP will display when water temp is not current, and will indicated by “ ” on the LCD readout. The Priming Mode will last for up to 4 alternate with current water temp when the pump is running.
- Page 4 VL801D Quick Reference Guide DIAGNOSTIC MESSAGES Message Meaning Action Required No message on display. The Control Panel will be disabled until power returns. Power has been cut off to the Spa. Time of day will be preserved for 30 days with a battery backup. ‘Overheat’...
- Page 5 VL260 Quick Reference Guide INITIAL START-UP Light Press the Light button to turn the Spa Light on/off. If left on, the Light automatically indicated by “ ” on the LCD readout. The Priming Mode will last for up to 4 turns off after 4 hours.
- Page 6 VL260 Quick Reference Guide DIAGNOSTIC MESSAGES Message Meaning Action Required No message on display. The Control Panel will be disabled until power returns. Power has been cut off to the Spa. Spa settings will be preserved until the next power up.. Temperature unknown After the Circulation Pump has been running for 2 minutes, the temperature will be displayed.
Need help?
Do you have a question about the TP600 and is the answer not in the manual?
Questions and answers