Hitachi BD-SG100CJ Operating & Installation Instructions Manual page 25

Dry Filter Port
How to remove
Partition plate
Clean the dry fi lter port when the Dry Filter indicator does not turn off or
when "C06" appears. Lint may be present at the rear of the dry fi lter port.
1. Press Power button to turn on the power.
2. Hold Dry (program) button for at least 3 seconds.
●
After "- - -" appears in the remaining time indicator, the washer dryer
will automatically turn off.
3. Lift the dry fi lter vertically after the display disappears.
4. Remove the partition plate.
Hold the upper part of the partition plate and remove it by pulling
toward you.
5. Clean up the dust adhering at the rear of the inlet.
6. Reinstall the projection of the partition plate into the recess.*
Press the partition plate to the back and attach it to the body fi rmly.
7. Reinstall the dry fi lter.
Remove dust.
(Do not put a stick or
fi nger to the back side)
How to reinstall*
Projection
Recess
25