How To Use The Washer Dryer - Hitachi BD-SG100CJ Operating & Installation Instructions Manual

6
1
1
Sort and load
the laundry
2
Press the Power
button to switch
power on
3
Select the
programs
4
Using the Timer
5
Press the Start/
Pause button
6
Add detergent
into the detergent
case
12

How to Use the Washer Dryer

■
Sort the laundry according to type of fabric, care label symbol, color
and degree of soiling.
Preparation of the washing (P.9).
■
Do not exceed the maximum load.
■
Close the door. Take care not to trap any items of clothing between the
door and rubber seal.
■
If no program is selected or no button is pressed for 20 minutes, the
washer dryer automatically switches itself off. Press the Power button
again to turn power on.
■
Select a washing program fi rst with the Operation button.
■
The duration of the selected program is shown on the display as a
guide. Actual washing time may vary depending on the conditions.
■
Use the option buttons to set additional functions.
Control Panel and Display (P.11).
Program Overview (P.18).
■
If you select the wrong program by mistake, reselect the washing
program by pressing the Operation button.
■
When the Cotton program is selected, settings such as spin speed,
additional options, etc., are memorized. Same settings can be used
when the Cotton program is selected again.
■
Set the washer dryer to fi nish operation 3 to 24 hours later in 1-hour increments.
■
The delay time indicates the time at which the operation will fi nish.
For example, if you want the operation to be fi nished fi ve hours later,
set the delay time to 5 hours.
■
If you want to unlock the door or change settings while timer is set,
press Power button and turn off the power. After that setting again.
■
If the program duration is longer than selected delay time, selected
program will start immediately.
■
The washer dryer starts to detect laundry size, fabric type and water
temperature before setting the wash time.
■
The wash time displayed on the remaining time indicator varies
according to the conditions.
Control Panel and Display (P.11).
■
The detergent and any additives must be placed in the appropriate case.
Product Descriptions (Detergent case) (P.10).
■
Add the appropriate amount of detergent suggested in the
manufacturers' instructions.
Detergent and additives (P.9,14).
4
(Using the Timer)
3
2
5