Hitachi BD-SG100CJ Operating & Installation Instructions Manual page 21

Reducing uneven or over-dry drying results
The drying results for laundry will vary depending on the wash load size and type of laundry.
Before you start the operation, adjust the level of drying according to your situation.
Settings that can be changed via the Wash(time) button
When you hold the Wash(time) button for at least 3 seconds, three numbers will appear in the display
as shown below.
The displayed numbers indicate the current settings of respective functions.
Example:
1. Press Power button to turn on the power.
2. Press Wash Dry or Dry button to select the program.
3. Press Spin/Dry Level button to change the setting.
■
Low : Use when laundry is over-dried(resulting laundry may be slightly moist).
■
― : Default setting
■
High : Use when drying is uneven.
4. Press Start/Pause button.
The operation starts.
Adjust the spin startup conditions.
Adjust the spin speed during the dry cycle of Wash Dry operations.
Turn the temperature sensor control on or off.
1. Press Power button to turn on the power.
2. Hold Wash(time) button for at least 3 seconds.
Adjust the spin startup conditions.
3. Press Spin button to change the setting.
■
0: Low-Vibration Mode
Reduces the vibration and noise during spin. (Operation time will be longer.)
■
1: Standard Mode (default setting)
■
2: Smooth Mode
Spin startup is smoother. (Depending on the type of laundry,
vibration and noise may increase.)
Adjust the spin speed during the dry cycle of Wash Dry operations.
3. Press Rinse button to change the setting.
■
0: High-Speed Mode (default setting)
■
1: Mid-Speed Mode (Operation time will be longer.)
■
2: Low-Speed Mode (Operation time will be longer.)
Turn the temperature sensor control on or off.
3. Press Wash(time) button to change the setting.
■
0: Off (default setting)
■
1: On
4. Press Start/Pause button.
Pressing the Start button completes the setting.
5. Press Power button to turn off the power.
21