6.2.2.5. Installation of the Wave Washer
1. Install the Wave Washer.
6.2.2.6. Installation of the Zoom Ring Unit,
the Ring Mount Base Unit and
the Zoom Drive Pin
1. Install the Zoom Ring Unit to Ring Mount Base Unit.
Zoom Ring Unit
2. Install the Ring Mount Base Unit.
3. Tighten 3 screws (J) by using the torque driver
with specified torque.
Screw (J)
Screw (J) x 3
Screw Order
Torque
4. Install the Zoom Drive Pin.
5. Tighten screw (H) by using the torque driver
with specified torque.
Screw (H)
Torque
13
None specified
8.0 ± 1.0 N ・cm
Screw (H)
7.0 ± 1.0 N ・cm