6.2.2.9. Installation of the Rear Frame Unit
and the Dustproof Rubber
1. Install the Rear Frame Unit and the Dustproof Rubber.
2. Tighten 3 screws (E) in numerical order
by using the torque driver with specified torque.
Connector
③
Screw (E)
Screw Order
Torque
Dustproof Rubber
②
①
Screw (E) x 3
① → ② → ③
7.0 ± 1.0 N ・cm
6.2.2.10. Installation of the L Mount Unit
1. Install the L Mount Unit.
2. Tighten screw (C) and 3 screws (D) in numerical order
by using the torque driver with specified torque.
④
Screw (C)
③
Screw (D)
Screw (C) Screw (D) x 3
Screw Order
Torque:screw (D)
Torque:screw (C)
15
①
②
① → ② → ③ → ④
20.0 ± 1.2 N ・cm
6.0 ± 1.0 N ・cm