Phone Numbers With Pauses - Casio G'zOne Rock User Manual

4.
Select the phone number type, then press the Center Select Key
[OK].
Mobile 1/Mobile 2/Home/Work
If a phone number is already assigned to the field you selected,
Entry is already assigned. Overwrite? appears on the display.
Select Yes to overwrite, then press the Center Select Key [OK].
5.
Complete any additional fields and press the Center Select Key
[SAVE] to update the contact entry. CONTACT UPDATED appears
on the display. The phone number reappears on screen. Press the
End/Power Key to exit, or press the Send Key to make a call to the
displayed phone number.

Phone Numbers with Pauses

Pauses are used for automated systems (e.g. voicemail or calling
cards). Insert a pause after a set of numbers then enter another set.
The second set of numbers is dialed after the pause. This feature
is useful for dialing into systems that require a code. There are two
different types of pauses you can use when registering a phone
number:
• Wait (W): The handset stops dialing until you press the Left Soft
Key [Release] to advance to the next number.
• 2-Sec Pause (P): The handset waits 2 seconds before
automatically dialing the next set of numbers.
Registering a Phone Number with Pauses
1.
From idle mode, enter the phone number.
2.
Press the Right Soft Key [Options], then press
Pause or
3.
Enter the additional number(s) (e.g. PIN number or credit card
number).
4.
Press the Left Soft Key [Save], then press
48
Add Wait.
Add 2-Sec
Add New Contact.