Advertisement
V
ECTOR
5.5 Display input and output states
Overview
In the input or output submenu there are 4 different display options:
UI
= Display of universal inputs (view input values)
Ao
= Display of analog outputs (view and set output values)
FAN
= Fan display (view and set fan speeds)
do
= Display of digital, 3-point or PWM outputs (view and set output signals)
Deactivated inputs are not displayed!
Procedure
1.
Press the (
) button longer than 2 seconds
2.
Press the ( ) or ( ) button until the universal input submenu UI and
SEL is displayed.
➔ U–I and SEL is displayed.
3.
Press the (
) button and select one of the universal inputs with the
( ) ( ) button.
➔ U-I, the input number and the value are displayed.
4.
To go back to the previous submenu, press the (
5.
Press the ( ) button to go to the analog output submenu.
➔ Ao and SEL is displayed.
6.
Press the (
) button and select one of the analog outputs with the ( )
( ) button.
➔ Ao, the output number and the value are displayed.
7.
To go back to the previous submenu, press the (
8.
Press the ( ) button to go to the fan output submenu.
➔ FAN and SEL is displayed.
9.
Press the (
) button and select one of the fan outputs with the ( )
( ) button.
➔ FAN, the output number and the value are displayed.
10. To go back to the previous submenu, press the (
Doc: 70-07-0951A, 20220504
Subjects to alteration
X2-O
PERATIONS
) button (1x).
) button (1x).
) button (1x).
© Vector Controls LLC, USA
www.vectorcontrols.com
M
T
D
ANUAL
OUCH
ISPLAY
Page 16-18
Advertisement
