1. Manuals
  2. Brands
  3. HOLMS Manuals
  4. Blower
  5. SH 2.5
  6. Operating instructions manual

HOLMS SH 2.5 Operating Instructions Manual

Hydraulic sweeper roller
Hide thumbs Also See for SH 2.5:
Table of Contents

Advertisement

Quick Links

Operating instructions
SH
Hydraulic sweeper roller
2.5 m/3.0 m/3.5 m
Applicable from machine no.: 18493
Box 924 SE-591 29 Motala Sweden
+46 141 22 41 00
+46 141 22 41 90
Original language: Swedish
© HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 161230.
English

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SH 2.5 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for HOLMS SH 2.5

Summary of Contents for HOLMS SH 2.5

  • Page 1 Hydraulic sweeper roller 2.5 m/3.0 m/3.5 m Applicable from machine no.: 18493 Box 924 SE-591 29 Motala Sweden +46 141 22 41 00 +46 141 22 41 90 Original language: Swedish © HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 161230. English...

  • Page 3: Table Of Contents

    Operation ............16 Sprinkler system (extra equipment) ....17 Service and maintenance...........18 After operation ..........18 Lubrication ............18 Replacing the brush ..........18 Replacement of the Swish brush........21 Tip ..............21 Change of brushes SIB ..........22 Index................23 © HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 161230.

  • Page 4: Warning Labels

    There are several specific warning labels on this product; see the descriptions below. Make sure that you understand the implications of these labels before using the product. Clean/replace warning labels if they are illegible or are missing. Contact you Holms dealer if you require new labels.
  • Page 5 Use the marked loops when transporting the tool (warning label 1530056) When transporting the tool, use the marked loops to secure the tool during transit. © HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 161230.
  • Page 6 Use approved lifting devices only. Risk of crushing - mind your hands (warning label 1530060) Mind your hands and keep them away from this area whilst the tool is in use. © HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 161230.

  • Page 7: Safety

    The operator is responsible for ensuring that: Make sure you tighten the screw joint reinforcement. The machine is not used or handled incorrectly. That any warning labels on the machine are legible. © HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 161230.
  • Page 8 MATERIAL DAMAGE RESULTING FROM THE USE OF NON APPROVED SPARE PARTS OR MODIFICATIONS When ordering spare parts, or otherwise contacting Holms or your local dealer, always specify the machine type and its serial number. (Specified on the product’s machine plate.)

  • Page 9: Product Data

    Centre of gravity, dimension B with sprinkler system, full tank (mm) Max. oil flow (litres/min) All weights and dimensions are for standard model without attachment. For extra equipment, please contact Holms for further information. 1.Centre of gravity © HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 161230.

  • Page 10: Machine Identification Plate

    Serial No. • Year of manufacture • Weight • Code of the person who assembled the tool 2.Machine identification plate (Assembler) • Code of the person who checked the tool on delivery (Checked). © HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 161230.

  • Page 11: Product Description

    Lorry attachment with built-in lifting function for VV-85, DIN plate or equivalent. • Various types of brush, conventional or Dusk design, steel or plastic. • Universal electrical cabling. 4.SH equipped with sprinkler system © HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 161230.

  • Page 12: Transport And Storage

    When transporting the tool, use the marked loops 5.Lifting eye to secure the tool during transit. Storage Park on supports to avoid damage to the brush. If your tool has a sprinkler system, remember to empty it before storing. © HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 161230.

  • Page 13: Operating Instructions

    5. Connect the quick couplings on the drive hoses to a double-acting hydraulic outlet or to the hydraulic 7.Washer between gate and motor circuit on the carrier. attachment © HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 161230.

  • Page 14: Operator Settings

    5. Start the sweeper roller via the third hydraulic function or via the hydraulic motor circuit. When angling a sweeper roller using electrohydraulic angling, the roller must be in contact with the ground. 10.Tilt indicator © HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 161230.
  • Page 15 Lower the attachment, to relieve pressure on the springs, before making any adjustments. 4. Reduce the ground pressure by lowering the 12.Supports in parking position adjustment lever. 5. Increase the ground pressure by raising the adjustment lever (figure 11). © HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 161230.

  • Page 16: Operation

    Before disconnection the roller must be in line with the angling cylinder and any lateral movement. 1. Position the supports in the parking position (see figure 16). Set the connection device pin in the lifting 16.Supports in parking position position. © HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 161230.

  • Page 17: Sprinkler System (Extra Equipment)

    The easiest thing is to empty the tank first and then run the pump dry for 20-30 seconds. When emptying the tank, remove the hose coupling from the tank. © HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 161230.

  • Page 18: Service And Maintenance

    (figure 20). Risk of crushing. 4. Unfold the roller brush from the bar tube and slide the roller off the carrier housing at the other end. 19.Removal of fixing screws 20.Removal of end © HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 161230.
  • Page 19 12. Fit the second clamping ring. 23.The clamping ring pin in the groove on the brush core. 24.Spacer ring © HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 161230.
  • Page 20 3. Fit the four fixing screws on the end. See figure 27. rings’ pins 4. Fit the attachments for the hydraulic hoses on the bar tube. 26.Fitting the end 27.Fixing screws for end © HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 161230.

  • Page 21: Replacement Of The Swish Brush

    7. Lock the catch, see figure 29. 8. Turn the outer stop to its locked position, see figure 29.Catch 30.Open position Lubricating the tracks with soap or the like will simplify brush replacement. 31.Replacing the brush 32.Locked position © HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 161230.

  • Page 22: Change Of Brushes Sib

    See picture 33. 2. Slide out the old cassettes and replace with new, see picture 34. 3. Mount the two plates and screws as in picture 33. 33.Removing the plates 34.Replacing cassettes © HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 161230.

  • Page 23: Index

    20 roller brush 18 fixing screws removing end 18 roller brush 18 gate 13 replacement ground pressure brush 18 adjusting 15 adjustment lever 15 increasing 15 reducing 15 setting 15 © HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 161230.
  • Page 24 5 types of brush 11 universal electrical cabling 11 vertical position 14 warning 4 warning labels 7 clean/replace 4 warning symbols 7 weight with sprinkler system 9 width 9 working width 9 © HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 161230.

This manual is also suitable for:

Sh 3.0Sh 3.5

Table of Contents