Advertisement
INSTRUCTION MANUAL
•
Only use replacement bars and chains specified by the manufacturer. Incorrect replacement bars and
chains may cause chain breakage and/or kickback.
•
Follow the manufacturer's sharpening and maintenance instructions for the saw chain. Decreasing the
depth gauge height can lead to increased kickback.
PETROL TOOL USE AND CARE
1. Store petrol in containers specifically designed for this purpose.
2. Refuel outdoors only and do not smoke while refueling.
3. Add fuel before starting the engine. Never remove the cap of the tank or add petrol while the engine is
running or when the engine is hot.
4. If petrol is spilled, do not attempt to start the engine but move the machine away from the area of spillage
and avoid creating any source of ignition until petrol vapors have dissipated.
5. Replace fuel tank & container caps securely.
6. Do not operate the engine in a confined space where dangerous carbon monoxide can collect.
7. Do not force the machine. Use the correct machine for your application. The correct machine will do the
job better and safer at the rate for which it was designed.
8. Do not use the machine if the on/off switch does not work to turn the machine off. Any machine that
cannot be controlled with the on/off switch is dangerous and must be repaired.
9. Turn machine off completely before making any adjustments, changing accessories, or storing. Such
preventive safety measures reduce the risks of starting the petrol tool accidentally.
10. Store idle machines out of the reach of children and do not allow persons unfamiliar with the machine or
these instructions to operate. Petrol machines are dangerous in the hands of untrained users.
11. Maintain your machine. Check for misalignment or binding of moving parts, breakage of parts & any other
condition that may affect the operation. If damaged, have the machine inspected by an Approved Webb
Service Dealer immediately. Many accidents are caused by poorly maintained machines.
12. Use the machine, accessories and tool bits etc., in accordance with these instructions and in the manner
intended for the particular type of petrol machine, taking into account the working conditions and the
work to be performed. Use of the machine for operations different from intended could result in a
hazardous situation.
PERSON PROTECTION
1. In case of any injury always proceed in accordance with the principles of first aid.
2. If someone is cut, cover the wound with a clean cloth & press hard to stop the flow of blood.
3. Do not let petrol or oil come in contact with your skin. Keep petrol and oil away from the eyes. If petrol or
oil come into contact with the eyes, wash them immediately with clean water. If irritation is still present,
see a doctor immediately.
4. Individuals with poor circulation who are exposed to excessive vibration may experience injury to blood
vessels or the nervous system. Vibration may cause the following symptoms to occur in the fingers, hands
or wrists: numbness, tingling, pain, stabbing sensation, alteration of skin colour or of the skin. If any of
10
WARNING!
Petrol is highly flammable and explosive.
Advertisement
