Download Print this page

What To Do If - Electrolux EDH10TRBW1 User Manual

Advertisement

7. WHAT TO DO IF...

Before calling for service, review this list. It may save you time and expense. This list
includes common occurrences that are not the result of defective workmanship or
materials in this appliance.
Occurrence
Dehumidifier does
not operate
The programme
/ cycle lasts too
long.
Possible Cause
Wall plug
disconnected.
House fuse blown
or circuit breaker
tripped.
The dryness level
you selected has
been reached.
Water Tank not
installed properly.
Water in the water
tank has reached its
preset level.
Dehumidifier is not
turned on.
Windows or doors
near dehumidifier
are open to
outdoors.
Area to be
dehumidified is too
large.
Air movement
through dehumidifier
is blocked. Grill may
be dirty.
Dehumidifier has
been installed or
restarted recently.
Dehumidifier is in
the Continuous
operation and will
remain on in this
mode.
Solution
Push plug firmly into wall outlet.
Replace fuse with time delay type or
reset circuit breaker.
Dehumidifier automatically shuts off
when selected amount of moisture
has been removed from the air. If you
want to remove more moisture, enter
in Continuous operation. After the
dehumidifier starts, reset the control
panel to the desired setting.
See "5.12 Removing Collected Water".
Dehumidifier automatically turns off when
this occurs. Empty water tank and return
it to position.
Turn unit on.
Close all windows or doors to outside.
Check with your dealer to see if capacity
is adequate.
Use brush attachment of vacuum cleaner
to clean grill. See "6. Care, Cleaning and
Storage". Dehumidifier must be placed in
a space that does not restrict air flowing
into the air intake or outlet.
The higher the moisture in the room, the
longer the dehumidifier will operate.
Exit this operation.
ENGLISH
15

Advertisement

loading