Table of Contents
Advertisement
Quick Links
1.
OVERVIEW.......................................................................................................................................... 1
2.
INSTALLATION................................................................................................................................... 3
2.1. CARE AND HANDLING OF OPTICAL FIBER........................................................................... 5
2.1.1. Safety .............................................................................................................................. 5
2.1.2. Assembly......................................................................................................................... 5
2.1.3. Labeling........................................................................................................................... 5
2.1.4. Handling and Connecting Fibers ..................................................................................... 6
3.
SPECIFICATIONS............................................................................................................................... 7
3.1. SERIAL VIDEO INPUT ............................................................................................................... 7
3.2. SERIAL VIDEO OUTPUT ........................................................................................................... 7
3.3. OPTICAL OUTPUT..................................................................................................................... 7
3.4. SYSTEM PERFORMANCE ........................................................................................................ 7
3.5. ELECTRICAL ............................................................................................................................. 8
3.6. COMPLIANCE ............................................................................................................................ 8
3.7. PHYSICAL .................................................................................................................................. 8
4.
STATUS INDICATORS AND DISPLAYS ........................................................................................... 9
4.1. STATUS INDICATOR LEDS ...................................................................................................... 9
4.2. DOT-MATRIX DISPLAY / CARD STATUS AND CONTROLS ................................................ 10
4.2.1. Display of Warning Status Indications........................................................................... 12
4.2.2. Displaying the Video Standard ...................................................................................... 12
4.2.3. Displaying the Equalization Strength ............................................................................ 12
4.2.4. Displaying the Input Mode............................................................................................. 13
4.2.5. Displaying the Firmware Version................................................................................... 13
4.2.6. Setting the Input Mode .................................................................................................. 13
4.2.7. Setting Video Error Detection........................................................................................ 14
4.2.8. Controlling Loopback Connector Output ....................................................................... 15
4.2.9. Controlling the Behavior of the Laser ............................................................................ 15
4.2.10. Setting the Orientation of the Text on the Card Edge Display....................................... 15
4.2.11. Resetting Factory Defaults ............................................................................................ 16
5.
JUMPERS AND LOCAL CONTROLS .............................................................................................. 17
BY THE GLOBAL FRAME STATUS........................................................................................ 17
7707VT-4-HS Quad SD/Dual HD-SDI Fiber Transmitter
TABLE OF CONTENTS
Revision 1.4
7700 MultiFrame Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for evertz 7707VT13-4-HS
Summary of Contents for evertz 7707VT13-4-HS
-
Page 1: Table Of Contents
7700 MultiFrame Manual 7707VT-4-HS Quad SD/Dual HD-SDI Fiber Transmitter TABLE OF CONTENTS OVERVIEW............................1 INSTALLATION........................... 3 2.1. CARE AND HANDLING OF OPTICAL FIBER................5 2.1.1. Safety ..........................5 2.1.2. Assembly......................... 5 2.1.3. Labeling........................... 5 2.1.4. Handling and Connecting Fibers ..................6 SPECIFICATIONS.......................... - Page 2 7700 MultiFrame Manual 7707VT-4-HS Quad SD/Dual HD-SDI Fiber Transmitter 5.2. CONFIGURING THE MODULE FOR FIRMWARE UPGRADES ..........17 VISTALINK REMOTE MONITORING/CONTROL ................18 ® VISTA 6.1. WHAT IS LINK ? ......................18 ® VISTA 6.2. LINK MONITORED PARAMETERS ................18 ®...
- Page 3 Aug 2010 Information contained in this manual is believed to be accurate and reliable. However, Evertz assumes no responsibility for the use thereof nor for the rights of third parties, which may be affected in any way by the use thereof. Any representations in this document concerning performance of Evertz products are for informational use only and are not warranties of future performance, either expressed or implied.
- Page 4 7700 MultiFrame Manual 7707VT-4-HS Quad SD/Dual HD-SDI Fiber Transmitter WARNING Never look directly into an optical fiber. Non-reversible damage to the eye can occur in a matter of milliseconds. Do not hook up the 7707VT-4-HS DWDM cards and any 7707VR-4-HS series cards directly with a short fiber optic cable.
-
Page 5: Overview
Monitoring and control of card status and parameters is provided locally at the card edge or remotely via VistaLINK ® The 7707VT-4-HS is available in different versions to meet a variety of applications. 7707VT13-4-HS 1310 nm FP Suitable for distances up to 50 Km 7707VT15-4-HS 1550 nm DFB Suitable for distances up to 75 Km There are several versions with built in isolators specifically suited to coarse wave division multiplexing (CWDM) applications. -
Page 6: Figure 1-1: 7707Vt-4-Hs Block Diagram
7700 MultiFrame Manual 7707VT-4-HS Quad SD/Dual HD-SDI Fiber Transmitter Features: • Single card multiplexor allowing the flexibility of various combinations of HD-SDI and SDI/SDTi signals: o Two HD-SDI signals or; o One HD-SDI signal and three SDI/SDTi signals or; o Four SDI/SDTi signals •... -
Page 7: Installation
7700 MultiFrame Manual 7707VT-4-HS Quad SD/Dual HD-SDI Fiber Transmitter INSTALLATION The 7707VT-4-HS comes with a companion rear plate that has five BNC connectors and one SC/PC (shown), ST/PC or FC/PC optical connector. For information on mounting the rear plate and inserting the module into the frame see section 3 of the 7700FR chapter. -
Page 8: Table 2-1: Input Signal Combinations
7700 MultiFrame Manual 7707VT-4-HS Quad SD/Dual HD-SDI Fiber Transmitter The following signal combinations may be installed on the input connectors: Input Input Input Input Connector Combination #1 Combination #2 Combination #3 Combination #4 HD-SDI HD-SDI SDI/SDTi SDI/SDTi HD-SDI SDI/SDTi HD-SDI SDI/SDTi SDI/SDTi SDI/SDTi... -
Page 9: Care And Handling Of Optical Fiber
2.1.1. Safety CLASS 1 LASER PRODUCT 2.1.2. Assembly Assembly or repair of the laser sub-module is done only at Evertz facility and performed only by qualified Evertz technical personnel. 2.1.3. Labeling Certification and Identification labels are combined into one label. As there is not enough room on the product to place the label, it is reproduced here in the manuals. -
Page 10: Handling And Connecting Fibers
5 cm to avoid fiber-bending loss that will decrease the maximum attainable distance of the fiber cable. The Evertz fiber optic modules come with cable lockout devices. This prevents the user from damaging the fiber by installing a module into a slot in the frame that does not have a suitable I/O module. -
Page 11: Specifications
7700 MultiFrame Manual 7707VT-4-HS Quad SD/Dual HD-SDI Fiber Transmitter SPECIFICATIONS 3.1. SERIAL VIDEO INPUT Number of Inputs: 2 HD/SDI/DVB-ASI and 2 SDI/DVB-ASI video signals Standards: HD/SDI Inputs: SMPTE 292M, SMPTE 259M-C, DVB-ASI SDI Inputs: SMPTE 259-C, DVB-ASI Connector: 4 BNC per IEC 61169-8 Annex A Equalization: Automatic to 100m at 1.485Gb/s and 250m at 270Mbp/s with Belden 1694A or equivalent cable... -
Page 12: Electrical
7700 MultiFrame Manual 7707VT-4-HS Quad SD/Dual HD-SDI Fiber Transmitter 3.5. ELECTRICAL Voltage: +12 VDC Power: 10 Watts (Non DWDM) 13 Watts (DWDM) 3.6. COMPLIANCE Electrical Safety: CSA Listed to CSA C22.2 No. 60065-03, UL 60065-03 IEC 60065-(2001-12) 7th Edition Complies with CE Low voltage directive 93/68/EEC Laser Safety: Complies with 24 CFR 1040.10 and 1040.11 except for deviations pursuant to LN No. -
Page 13: Status Indicators And Displays
7700 MultiFrame Manual 7707VT-4-HS Quad SD/Dual HD-SDI Fiber Transmitter STATUS INDICATORS AND DISPLAYS The 7707VT-4-HS has 7 LED Status indicators and a 4 digit alphanumeric display on the front card edge to show operational status of the card at a glance. The card edge pushbutton is used to select various displays on the alphanumeric display. -
Page 14: Dot-Matrix Display / Card Status And Controls
7700 MultiFrame Manual 7707VT-4-HS Quad SD/Dual HD-SDI Fiber Transmitter VIDEO 2 STATUS: Green indicates the presence of a valid signal on channel 2. Yellow indicates that the signal connected to channel 2 conflicts with the currently selected input mode (see section 4.2.4). Red indicates the detection of bit errors on channel 2 (when bit error detection is enabled –... -
Page 15: Figure 4-2: Card Edge Menu Structure
7700 MultiFrame Manual 7707VT-4-HS Quad SD/Dual HD-SDI Fiber Transmitter Pushbutton Top Level Menu Level 1 Menu Level 2 Menu Level 3 Menu Level 4 Indications Selections Selections Selections Indications STD (Video Standard) Standards Per Table LASR...ERR (Laser Error) LOS (Loss of Signal) VID1 (Video Input 1) Indications OK (Laser OK) -
Page 16: Display Of Warning Status Indications
7700 MultiFrame Manual 7707VT-4-HS Quad SD/Dual HD-SDI Fiber Transmitter 4.2.1. Display of Warning Status Indications The top level, default display indicates overall card status and warnings: Card is functioning properly Laser Error Warning – Flashing indication alternates between LASR and ERR. LASR…ERR Pressing the pushbutton from this default display will allow the user to select from STAT (status) and CTRL (control) menu items. -
Page 17: Displaying The Input Mode
7700 MultiFrame Manual 7707VT-4-HS Quad SD/Dual HD-SDI Fiber Transmitter 4.2.4. Displaying the Input Mode The input mode of the 7707VT-4-HS is configured either automatically or manually by the user depending on the signals connected to the inputs of the card (see section 4.2.6 for details). To display the input mode, select the STAT menu item in menu level 1 then use the toggle switch to display the MODE option and press the pushbutton to select it. -
Page 18: Setting Video Error Detection
7700 MultiFrame Manual 7707VT-4-HS Quad SD/Dual HD-SDI Fiber Transmitter The available manual settings and signal combinations are as follows: Connector HHXX HSSS SHSS HD-SDI or SDI/SDTi HD-SDI or SDI/SDTi SDI/SDTi HD-SDI or SDI/SDTi SDI/SDTi HD-SDI or SDI/SDTi SDI/SDTi SDI/SDTi SDI/SDTi SDI/SDTi Table 4-2: Input Modes and Signal Connections If a new signal is connected that conflicts with the present mode setting, it will not be transmitted by the... -
Page 19: Controlling Loopback Connector Output
7700 MultiFrame Manual 7707VT-4-HS Quad SD/Dual HD-SDI Fiber Transmitter 4.2.8. Controlling Loopback Connector Output The VOUT menu item allows the user to control which input video signal will be passed through to the “HD/SDI OUT” connector on the 7707VT-4-HS. To select the output signal, select the CTRL menu item in menu level 1, then use the toggle switch to display the VOUT option and press the pushbutton to select it. -
Page 20: Resetting Factory Defaults
7700 MultiFrame Manual 7707VT-4-HS Quad SD/Dual HD-SDI Fiber Transmitter 4.2.11. Resetting Factory Defaults The FRST menu option will return the 7707VT-4-HS to factory defaults. To return all settings to factory defaults, select the CTRL menu item in menu level 1, then use the toggle switch to display the FRST menu selection and use the pushbutton to select it. -
Page 21: Jumpers And Local Controls
7700 MultiFrame Manual 7707VT-4-HS Quad SD/Dual HD-SDI Fiber Transmitter JUMPERS AND LOCAL CONTROLS Several jumpers, located at the front of the module are used to preset various operating modes. Figure 4-1 shows the location of the jumpers. 5.1. SELECTING WHETHER LOCAL FAULTS WILL BE MONITORED BY THE GLOBAL FRAME STATUS The FRAME STATUS jumper determines whether local faults (as shown by the Local Fault indicator) will be connected to the 7700FR frame's global status bus. -
Page 22: Vistalink ® Remote Monitoring/Control
1. An SNMP manager, also known as a Network Management System (NMS), is a computer running special software that communicates with the devices in the network. Evertz VL-Fiber demo Manager graphical user interface (GUI), third party or custom manager software may be used to monitor and control Evertz VistaLINK enabled fiber optic products. -
Page 23: Vistalink Traps
7700 MultiFrame Manual 7707VT-4-HS Quad SD/Dual HD-SDI Fiber Transmitter 6.3. VISTALINK CONTROLLED PARAMETERS ® The following parameters can be remotely controlled through the VistaLINK interface. ® Parameter Description Video Input Mode AUTO, HHXX, HSSS or SHSS input mode (see section 4.2.4) Enable or disable bit error detection on the input video signals (see Video Error Detection section 4.2.7) - Page 24 7700 MultiFrame Manual 7707VT-4-HS Quad SD/Dual HD-SDI Fiber Transmitter This page left intentionally blank Page - Revision 1.4...
Need help?
Do you have a question about the 7707VT13-4-HS and is the answer not in the manual?
Questions and answers