Table of Contents
Advertisement
Slide the measuring aid forwards.
2.
Fold the measuring aid down and
3.
click it into place.
Push in the detergent drawer.
4.
14.8 Adding detergent and
care product
Notes
¡ Do not use the measuring aid for
liquid detergent for gel detergents,
washing powder, or if Prewash or
"Ready in" time are activated.
¡ Observe the information about de-
tergents and care products
→ Page 31.
Pull out the detergent drawer.
1.
Pour in detergent.
2.
→ "Detergent drawer", Page 19
If required, add the care product.
3.
Push in the detergent drawer.
4.
14.9 Starting the programme
Requirement: A programme has
been set.
→ "Setting a programme", Page 31
Press
.
1.
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows either the pro-
gramme duration or the "Ready in"
time.The display shows either the
programme duration or the "Ready
in" time.
a After the programme has ended,
the display shows: End.
If
is selected, the laundry is not
2.
spun and the water is drained after
rinsing.
Note: If you do not remove the laun-
dry, the Anti-Crease programme
starts after 15 minutes. The pro-
gramme takes around 30 minutes.
The display shows 0:00 and
Press anywhere on the display to
cancel the Anti-Crease programme
and to remove the laundry.
14.10 Soaking laundry
Note: No additional detergent is re-
quired. The washing solution is then
used for washing.
Start the programme.
1.
To pause the programme, after ap-
2.
prox. 10 minutes, press
To resume the programme, after
3.
the desired soaking time, press
.
operation en
.
.
33
Advertisement
Table of Contents
