Advertisement
Activity
Tumbler Right Side Drive
In this activity, you build a complete robot called Tumbler.
You start by building the right-side drive train.
1.
The completed model is as shown:
To complete the first step:
Locate one Chassis Rail [R15].
Fasten two Bearing Flats [BF] to the Chassis Rail using two Bearing Rivets [BR] for each
Bearing Flat.
Fasten two 1" Beams [B1] to the Chassis Rail using using #8-32 x 1/4" screws [S2].
78
Autodesk's VEX Robotics Unit 1: Introduction to VEX and Robotics
Advertisement
