Table of Contents
Advertisement
Connecting to the Power Supply
Installation
Connecting to the Power Supply
Follow the specifications listed in
supply outlet for the extraction system, and verify the power supply is suitable before
connecting the system.
The air extraction system features a fused IEC inlet for the power cable, as well as a main
power switch.
The power outlet at the site should be located near the system. The power cable should be
routed so as not to create a trip hazard.
Connect the power cable to the system. Only connect the cable to the power outlet after
finishing the installation process.
Warning: Electric Shock Hazard
The extraction system must be connected to a properly grounded outlet.
Important:
Check the integrity of the electrical power cable. If the power cable is damaged, do not
connect the extraction system to the main power supply with that power cable.
Have a suitable plug installed on the supplied power cable by a licensed electrician, or
purchase a similar cable locally with the proper plug.
A separate cable with a type B plug is supplied for the relevant countries.
© Copyright 2021 Stratasys. All rights reserved.
"System Specifications" (page 11)
when selecting the power
Page 5
Advertisement
Table of Contents
