Edit Codes - Casio G'zOne Brigade User Manual

Edit Codes

To set a new Lock Code:
1.
From idle mode with the flip open, press the Center Select Key
[MENU], select Settings & Tools, then press the Center Select
Key [OK]. Press
2.
Enter the four-digit Lock Code, then press the Center Select Key
[OK].
3.
Press Edit Codes.
4.
Select one of the following settings, then press the Center Select
Key [OK].
Phone Only: Allows you to edit the Lock Code for the handset
only.
Calls & Services: Allows you to edit the Lock Code for all Calls &
Services.
5.
Enter the new four-digit code in the Enter New Code field.
If you selected Calls & Services in step 4, you would also need to
enter the current code before entering the new code.
6.
Press the Directional Key
New Code field.
7.
Enter the new four-digit code again as confirmation.
8.
Press the Center Select Key [SET].
NOTES
• The default Lock Code is the last 4 digits of your phone number.
• There are two Lock Codes: Phone Only and Calls & Services.
Restrictions
Use the following procedure to configure Location Setting, Calls,
Messages, and Dial-Up Modem restrictions.
1.
From idle mode with the flip open, press the Center Select Key
[MENU], select Settings & Tools, then press the Center Select
Key [OK]. Press
152
Phone Settings,
down to advance to the Re-enter
Phone Settings,
Security.
Security.