4
Installing the CallPilot 100/150
Installing the CallPilot 100/150
Unpack CallPilot 100/150
Mount the CallPilot 100/150
Connect the TCM and
power cables
Initialize CallPilot 100/150
using CallPilot Manager or
a telephone
Can you use the default
Yes
IP address
192.168.110.10
Change the IP address
serial or Ethernet cable
Change the IP address
using the serial port
Connect the CallPilot
100/150 to the LAN
Quick Install Wizard
Start CallPilot 100/150 Administration
programming. Refer to the CallPilot
Manager Set Up and Operation Guide.
N0008008 02
on the wall
CallPilot Manger
No
Ethernet
Serial
Run the
Telephone
Change the IP address
using an Ethernet
crossover cable
Start CallPilot 100/150 Administration
programming. Refer to the CallPilot
Telephone Administration Guide.
Determine the feature
codes
Configure the initial
parameters