Setting Up The Monitor; Attaching The Stand - Dell SE3223Q User Manual

Setting up the monitor

Attaching the stand

NOTE: The stand is not installed at the factory when shipped.
NOTE: The following instructions are applicable only for the stand that
was shipped with your monitor. If you are attaching a stand that you
purchased from any other source, follow the setup instructions that
were included with the stand.
To attach the monitor stand:
1. Remove the stand riser and the stand base from the cushion that secures it.
2. Connect the stand base to the stand riser.
3. Open the protective cover on the monitor to access the slot on the monitor.
Setting up the monitor
│
31