OSD warning messages
When the monitor does not support a particular resolution mode, the following
message is displayed:
NOTE: The message may be slightly different according to the
connected input signal.
This means that the monitor cannot synchronize with the signal that it is receiving
from the computer. See
frequency ranges addressable by this monitor. The recommended resolution is
3840 x 2160.
Before the DDC/CI function is disabled, the following message is displayed:
When the monitor enters the Standby Mode, the following message appears:
│
56
Operating your monitor
Dell 32 Monitor
The current input timing is not supported by the monitor display.
Please change your input timing to
Resolution specifications
Dell 32 Monitor
The function of adjusting display setting using PC application will be
disabled.
Do you wish to disable DDC/CI function?
Yes
Dell P2418HZ
Dell 32 Monitor
Going into Standby mode...
3840x2160, 60Hz
or any other
for the Horizontal and Vertical
No
SE3223Q
SE3223Q