Leupold GX-6c Operating Instructions Manual page 26

press MODE to save your selection and move on to the
altitude input .
3) The last saved altitude will be flashing in the
bottom portion of the display . If you wish to
input an altitude other than the one shown,
proceed to step 4 . To save the shown altitude
and return to ranging mode, let the unit sit
idle for at least 30 seconds until an automatic
power-down occurs, or simply press and hold
MODE for at least 2 seconds . To continue through the Quick
Set Menu and manipulate another feature, press and release
MODE until the appropriate mode is displayed .
4) Press POWER to begin incrementing through the altitude
settings . The default setting is 1000 feet . Pressing POWER
will increment through a range of 0 feet to 9,999 feet in 500
foot increments . When the appropriate altitude is displayed,
you have completed the input process for setting up the
Temperature and Altitude at which the striking distances were
measured . To save the changes and return to ranging mode,
let the unit sit idle for at least 30 seconds until an automatic
power-down occurs, or simply press and hold MODE for at
least 2 seconds . To continue through the Quick Set Menu and
manipulate another feature, press and release MODE until the
appropriate mode is displayed .
23