Leupold GX-6c Operating Instructions Manual page 21

for a 6-iron, and 170 yards for a 4-iron) . In addition to the striking
distances, the temperature and altitude at which these distances
were measured must be input following the distance input
process . By entering the environmental conditions in which the
specific distances were obtained, the Club Selector will be able to
adjust the recommended iron according to the current conditions .
NOTE: Though we strongly recommend inputting the specific
distances obtained with each of the irons mentioned above,
the specialized algorithms used by the GX-6c will make logical
assumptions about the remaining club(s) if specific distances are
not known for one or more of the remaining clubs.
YARDS/METERS MODE
NOTE: "SET UP" will briefly flash before
transition to YARDS/METERS.
This mode allows you to toggle between
Yards or Meters for the measurement output
unit . When set to Yards mode, all temperature
settings will be in Farenheit . When set to Meters
mode, all temperature settings will be in Celsius .
TO CHANGE FROM YARDS TO METERS:
1) Press POWER to activate the rangefinder .
18