Leupold GX-6c Operating Instructions Manual page 22

2) Press and hold MODE for at least 2
seconds to enter the Quick Set Menu .
3) Press and release MODE until "Set Up"
flashes briefly in the display, followed by
the word "Unit" is shown in the upper
display .
4) While the word "Unit" is shown in the
upper display, press and release POWER as necessary to
toggle between "YD" for Yards and "M" for Meters, which will
be shown in the lower right portion of the display .
5) To save the changes and return to ranging mode, let the unit
sit idle for a least 30 seconds until an automatic power-down
occurs, or simply press and hold MODE for 2 seconds .
NOTE: If Yards is selected, the temperature will automatically be
measured by Fahrenheit. If Meters is selected, the temperature
will be measured in Celsius.
CLUB SELECTOR SETUP (SU)
NOTE: You cannot input a distance value less than or equal to
the previous club. For example, if you choose 155 yards for
your 8-iron, the lowest available distance for your 6-iron will be
160 yards.
1) Press POWER to activate the rangefinder .
19