Table of Contents
Advertisement
front and rear deck lift shafts, and replace the
floorpan
2.
Remove the hairpin and clevis pin from the
handle assembly.
3.
Remove the handle assembly by sliding the
handle assembly upward and out of the mounting
bracket. The mounting bracket and support does
not have to be removed from the machine.
4.
Unlock the assembly and pivot it away from
the mower deck. Lift the Operator Controlled
Discharge accessory out of the deck mounting
tube.
5.
Lower the existing discharge deflector.
Important: Reinstall the original discharge
deflector if it was removed during the
Operator Controlled Discharge accessory
installation.
6.
The machine can now be used for side discharge
mowing.
13
Operation
Advertisement
Table of Contents
