Table of Contents
Advertisement
20. LINE OUTPUTS 1 to 8 – eight balanced analogue line outputs on a 25-pin female D-sub
connector. This connector is always active, and normally carries the outputs of Channels 1 to
8, enabling the Clarett+ OctoPre to be used as a stand-alone 8-channel analogue mic pre. In
ADAT > LINE mode, the connector carries the signals applied at the OPTICAL IN ports [19].
The pinout of the connector follows the "Tascam" standard for 8-channel analogue interfaces:
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
21. WORD CLOCK OUTPUT – a BNC connector carrying the Clarett+ OctoPre's word clock; this
may be used to synchronise other digital audio equipment.
22. WORD CLOCK IN – a BNC connector for the connection of an external word clock signal;
select by setting SYNC to W/CLOCK. Use this input if you have a Leader reference clock which
provides synchronisation for all the digital audio devices in your studio.
23. AC mains – standard IEC socket. The Clarett+ OctoPre is fitted with a "Universal" power
supply, and will run from any AC mains voltage from 100 to 240 V, at 50 or 60 Hz.
Function
Output 8 'hot' (+)
Output 8 Gnd
Output 7 'cold' (-)
Output 6 'hot' (+)
Output 6 Gnd
Output 5 'cold' (-)
Output 4 'hot' (+)
Output 4 Gnd
Output 3 'cold' (-)
Output 2 'hot' (+)
Output 2 Gnd
Output 1 'cold' (-)
n/c
Pin
Function
14
Output 8 'cold' (-)
15
Output 7 'hot' (+)
16
Output 7 Gnd
17
Output 6 'cold' (-)
18
Output 5 'hot' (+)
19
Output 5 Gnd
20
Output 4 'cold' (-)
21
Output 3 'hot' (+)
22
Output 3 Gnd
23
Output 2 'cold' (-)
24
Output 1 'hot' (+)
25
Output 1 Gnd
7
Advertisement
Table of Contents
