ZALMAN CNPS9500 User Manual page 6

2) Intel Pentium 4 - Socket 478
① ①
Install Clip
Refer to "How to Install the CNPS9500's Clip" on page 3 to correctly install the clip (S - Type,
CNPS9500.
② ②
Apply Thermal Grease
Clean off particles and residue from the top of
the CPU. Then spread the included thermal
②
grease ( ) thinly on top of the CPU.
③ ③
Install Clip Support for Socket 478
Install the two clip supports for Socket 478
⑩
( ) on both sides of the retention guide as
shown in the diagram.
④ ④
Place Cooler
Insert two installation bolts for Socket 478 (
at the center of the CPU. Using the L-wrench (
on the clip support for Socket 478(
manner until the clip (
※
When installing CNPS9500 on a motherboard with
horizontally-oriented retention guide, take extra care
not to let the L-wrench (
the fan. If excessive force is exerted on the fan, it
may cause a malfunction.
⑤ ⑤
Connect Power (Use FAN MATE 2)
◆
Please refer to FAN MATE 2 installation and usage on page 7.
The specifications of any product may change without prior notice to improve performance.
※
All manuals and user guides at all-guides.com
⑪
) into holes on the clip (S-Type,
⑫
⑩
) slightly at first. Then, fasten the bolts (
⑥
) is completely pressed against the clip supports.
Installation Bolt for Socket 478, ⑪
Clip(S-Type),
⑫
) exert excessive force on
Thermal Grease
CPU (IHS)
Clip Support for
Socket 478, ⑩
⑥
), fasten the bolts for Socket 478(
⑥
) on
) and place CNPS9500
⑪
) into each hole
⑪
) in an alternating
L-wrench,
5