SERVICE PARTS
99721T-4
99723T-4
99725T-4
99722T-4
99724T-4
99726T-4
99723T-4/99725T-4:1226013**
870667
871363
3016134
99721T-4/99723T-4/
99725T-4:3015582**
99721T-4/99723T-4/
99725T-4:3007134
3006991
3006930
3010602
871363
870667
3016134
3006991
3006930
99722T-4/99724T-4/
99726T-4:3007136
3010602
99724T-4/99726T-4:1226015**
833730
**Color code must be specified when ordering.
1226010-2A-B
MODULO
Recessed Bath Shower Trim And Valve
Recessed Shower Only Trim And Valve
99723T-4/99724T-4:1223612**
3006927**
99725T-4/99726T-4:1223611**
833438
3008523
3016037**(Only for CP)
99721T-4:1226005**
1233958**(Except CP)
99721T-4/99722T-4:1223615**
99722T-4:1226008**
99723T-4/99724T-4:1223612**
3006927**
99725T-4/99726T-4:1223611**
INSTALLATION INSTRUCTIONS
99721T-4
99723T-4
99722T-4
99724T-4
BEFORE YOU BEGIN
All information is based on the latest product information available at the time of publication. Kohler Co. reserves
the right to make changes in product characteristics, packaging, or availability at any time without notice.
Please leave these instructions for the consumer. They contain important information.
NOTES:
1. Flush the water supply pipes thoroughly to remove debris.
2. Inspect the supply tubing for damage and leakage. Replace and maintain as necessary.
3. Observe local plumbing codes. Shut off the main water supply.
4. Check for leaks before covering the pipes, repair as needed.
5. Please ensure only apply water pressure test on the product, and empty the air in pipe and faucet thoroughly
before the test. Please ensure test pressure below 0.8MPa(8bar) and test duration within 30 minutes.
STANDARD APPLICABLE
Special model meets or exceeds the following at date of manufacture: TIS
ROUGH-IN DIMENSIONS
Ø180
99721T-4
140
99723T-4
4
1226010-2A-B
99725T-4
Recessed Bath Shower Trim And Valve
99726T-4
Recessed Shower Only Trim And Valve
The finished wall
Ø180
14
68~98
99722T-4
The finished wall
140
15
66~96
MODULO
The finished wall
14
68~98
The finished wall
15
66~96
99724T-4
1