Rear Panel - AGFA Dry 2.4M User Manual

Rear panel

At the rear side of the printer, one slot and three connectors are available:
1 1
2 2
USB port slot
1.
To insert a USB flash drive for software installation, back-up, etc.
Network connector
2.
To connect to the hospital network.
Power connector
3.
To connect the printer power cord.
Inserting a USB flash drive
The printer is equipped with a USB port, which is located at the rear side.
Note: The USB flash drive must be formatted with the FAT32 file
system. An error will be displayed if a USB flash drive with a
different file system is inserted.
3 3
Dry 2.4M | Introduction | 61
2652B EN 20210601 1655