Replacing The Batteries - Chicco CyBearPhone Instruction Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 6

REPLACING THE BATTERIES

How to fit and remove the batteries
• Batteries must only be removed and fitted by an adult.
• To replace the batteries: Loosen the screw on the battery compartment cover with a screw-
driver and open the cover. Then remove the spent batteries and fit new ones, ensuring that
they have been fitted in the correct polarity (as shown on the product), close the battery
cover, and tighten the screw.
• Always keep batteries and tools out of the reach of children.
• Always remove spent batteries from the product to avoid the danger of leakage from the
battery damaging the product.
• If the batteries happen to leak liquid, replace them immediately, making sure you clean the
compartment beforehand; wash your hands thoroughly if you come into contact with any
such liquid.
• Always remove the batteries if the product will not be used for a long period of time
• Only use alkaline batteries of the same type or equivalent to the type recommended for the
correct function of this product.
• Never mix alkaline, standard (zinc-carbon) or rechargeable (nickel-cadmium) batteries.
• Never mix new and old or different types of batteries.
• Do not burn or dispose of old batteries into the environment. Dispose of them at an ap-
propriate differentiated collection point.
• Do not short-circuit the battery terminals.
• Do not attempt to recharge non-rechargeable batteries: they might explode.
• The use of rechargeable batteries is not recommended as the toy may not work properly.
• If using rechargeable batteries, remove them from the toy before recharging them. Batteries
must always be recharged under adult supervision.
• Remove the batteries from the toy before disposing of the product.
• This product is not designed for use with lithium batteries.
WARNING Improper use could be hazardous.
THIS PRODUCT COMPLIES WITH EU DIRECTIVE 2002/96/EC.
The crossed bin symbol on the appliance indicates that the product, at the end of
its life, must be disposed of separately from domestic waste, either by taking it to
a separate waste disposal site for electric and electronic appliances or by returning
it to your dealer when you buy another similar appliance. The user is responsible for taking
the appliance to a special waste disposal site at the end of its life. If the disused appliance is
collected correctly as separate waste, it can be recycled, treated and disposed of ecologically;
this avoids a negative impact on both the environment and health, and contributes towards
the recycling of the product's materials. For further information regarding the waste disposal
services available, contact your local waste disposal agency or the shop where you bought
the appliance.
7

Advertisement

Table of Contents
loading

Table of Contents