Fitting And/Or Replacing Batteries - Chicco 67648800070 - DJ Baby Walker Owner's Manual

Cómo colocar y/o reemplazar las pilas
WARNING
The Electronic Play Tray requires 2 x "AA" 1.5 Volt alkaline type batteries (not included).
• Batteries must only be fitted by an adult.
• To fit and/or replace batteries: Loosen the screw on the battery compartment cover with a
suitable screwdriver, press the tab and remove the battery compartment cover. Then remove
the spent batteries and fit new ones, ensuring that they have been fitted in the correct
polarity, as shown inside the battery compartment. Replace the battery cover and tighten the
screw.
• Always keep batteries and tools out of reach of children.
• Always remove spent batteries from the Electronic Play Tray to avoid the danger of possible
leakage from the battery.
• Always remove the batteries if the Electronic Play Tray will not be used for a long period.
• Only use alkaline batteries of the same type or equivalent to the type recommended for the
correct function of this product.
• Never mix new and old batteries, or different types of batteries.
• Do not burn or dispose of spent batteries into the environment. Dispose of spent batteries at
an appropriate differentiated collection point.
• Do not short-circuit the battery terminals.
• Do not attempt to recharge non-rechargeable batteries: they might explode.
• The use of rechargeable batteries is not recommended, since they could impair the
functionality of the Electronic Play Tray.
• If rechargeable batteries are used, take them out of the toy before recharging them. Batteries
must always be recharged under adult supervision.
22

Fitting and/or Replacing Batteries