Startup the printer
12
1
Remove the display protection foil.
1. Remove the display protection foil.
The films delivered with the printer are
intended for test purposes only.
The procedure is identical for the upper and
1
Remove the display protection foil.
2
Press the POWER button.
2. Press the POWER button.
The following status is displayed:
POWER
The following status is displayed:
The following status is displayed:
3
Press the UNLOCK button
4
Open the upper (lower) input tray.
UNLOCK
3. Press the UNLOCK button
4
Open the upper (lower) input tray.
Note: The films delivered with the printer are intended for test
purposes only.
Startup Drystar 5500/5503
Note: The procedure is identical for the upper and lower input
tray.
lower input tray.
DRY 3.4 | Plug & Play Installation Manual | 159
C
1
Remove the display protection foil.
C
The following status is displayed:
4
Open the upper (lower) input tray.
2602A EN 20191018 0826