Resetting The Digitizer - AGFA CR 85-X Reference Manual

Resetting the Digitizer

In exceptional circumstances you may be prompted to reset the CR 85-X,
either by a message on the keypad or as part of a troubleshooting procedure in
this manual.
Caution:
would do so, the plate inside the Digitizer might get damaged. In case of a
plate or cassette jam, always follow the procedures described in
'Troubleshooting'.
To reset the Digitizer:
Locate the main switch and place it in position 'OFF'.
1
Wait 30 seconds.
2
Place the main switch in position 'ON'.
3
4451C EN 2013-04-30
Never reset the Digitizer to solve a plate or cassette jam. If you
CR 85-X D
IGITIZER
Chapter 4,
35
Introducing the CR 85-X