Cleaning And Disinfection - AGFA CR 85-X Reference Manual

CR 85-X D
IGITIZER

Cleaning and Disinfection

All appropriate policies and procedures should be followed to avoid
contamination of the staff, patients and device. All existing universal
precautions should be taken to avoid that the digitizer comes into contact
with potential contaminations. Details about cleaning can be found in the
following pages.
To clean the exterior of the digitizer:
Switch off the digitizer.
1
Remove the power plug from the socket.
2
Switch off the UPS, if installed.
Wipe the exterior of the digitizer with a clean, soft, damp cloth.
3
Use a mild soap or detergent if required but never use ammonia-based cleaner.
Plug the power plug into the socket.
4
Switch on the UPS, if installed.
22
Introducing the CR 85-X
Caution: Make sure no liquid gets in the digitizer.
Note: Do not open the digitizer for cleaning. No components inside the
digitizer require cleaning by the user.
4451C EN 2013-04-30