Solving The 'Error' Status - AGFA CR 85-X Reference Manual

Solving the 'ERROR' status

Basically, there are two types of errors:
•
Errors which can be solved by the key-operator.
Example: Image plate jam. The error field reads 'ERROR XXXXX'.
•
Errors which can only be solved by a trained service engineer.
The error field reads 'SERVICE XXXXX'.
Solving 'SERVICE XXXXX' errors
If the error field reads
Reset the CR 85-X.
1
Refer to 'Resetting the Digitizer'
If the message persists, contact your local service organization and communicate
2
the error number.
Note: Do not attempt to correct the error yourself.
4451C EN 2013-04-30
':
'SERVICE XXXXX
on page 35.
CR 85-X D
IGITIZER
87
Troubleshooting