Table of Contents
Advertisement
7.2 Maintaining the interiors
7.2.1 Wooden interiors
The interior details of the boat, such as the locker doors and drawer fronts and wooden strips, are made
of oiled wood.
•
Clean the wooden interior details with a damp cloth and a small amount of soapy water.
•
Treat the wooden surfaces again every year to protect the wood.
7.2.2 Plastic and painted surfaces
1. Wet the surface evenly with water before the actual cleaning.
2. Remove stains.
◦
Remove regular stains with a brush and a lightly diluted cleaner.
◦
Remove grease with a brush or a sponge and window cleaner.
3. Clean the surface afterwards with sponge and water.
4. Wipe dry with a piece of cloth.
7.2.3 Fabrics
The interior fabrics are washed according to separate washing instructions (marking on the fabric).
In case the marking is not visible:
1. Wash in 40°C with a light spin cycle.
2. Hang to drip dry.
The material may slightly shrink. If you want to avoid shrinking, take the fabrics to a dry cleaner.
7.2.4 Doors and hatches
•
Clean the tracks of sliding doors and hatches regularly and lubricate, if necessary.
•
Lubricate handles and locks with regular lock lubricant.
7.3 Maintaining the cover
New covers may leak initially, as the seams need to swell.
During use
To prevent quick deterioration of the cover, secure it tightly in a folded-up position to prevent flapping.
Brabus Shadow 500 Cabin 2020
Owner's Manual
© 2022 Axopar Boats / Brabus Marine
-
-
7 Maintenance
Document ID: 500CMY20202205EN
Page 60
Advertisement
Table of Contents
