Table of Contents
Advertisement
7 Maintenance
7.1 Cleaning and maintaining the gelcoat surface
The gelcoat surface of the boat is subjected to environmental conditions which can, under certain
circumstances, lead to deterioration of the surface. Overtime, these external factors such as saltwater,
high UV exposure and temperature variation, can have an effect on the gelcoat surface.
Clean and maintain regularly all the gelcoat surfaces on the boat.
NOTICE
If the regular cleaning and maintenance is neglected, or if the boat is exposed to
certain environmental conditions where it is berthed, deterioration of the surface
finish such as fading, discoloration and brittles may become visible over time.
•
Wash and clean the boat after every trip, and weekly if it is stored outside uncovered.
•
Wax the boat twice a year if used all year, otherwise annually.
•
Inspect the gelcoat surface annually for signs of deterioration, such as brittle surfaces or
changed color tones.
•
Small scatches or discolorations can be fixed by buffing or polishing.
•
Severe scratches, discoloration or oxidation may require wet sanding before buffing, polishing
and vaxing.
Wet sanding is recommended to be performed by an Axopar dealer or a trained professional.
•
When the boat is not in use, keep the gelcoat surface out of the sun or cover the boat with a
canvas tarpaulin.
Do not use plastic or other non-porous materials, which can trap moisture between the cover
and the surface.
Washing
Use a cleaning product specially made for boats. Do not use household cleaning
NOTICE
products, clorine, acids or similar as they may damage the boat surface due to
their improper pH value.
Wash the boat after every trip by using a mild cleaning product. Dilute the cleaning product with fresh
water according to the instructions on the product label.
1. Rinse the deck and hull with fresh water to remove loose dirt.
2. Wash the surfaces with the diluted cleaning product and a soft-bristled brush.
3. Rinse off with fresh water.
Waxing
Waxing the gelcoat surface restores gloss and protects the finish. Only use wax recommended for
gelcoat, and follow the product instructions carefully.
Wax can either be applied by hand using a clean rag, or with an orbital-motion buffing machine.
Brabus Shadow 500 Cabin 2020
Owner's Manual
© 2022 Axopar Boats / Brabus Marine
-
-
7 Maintenance
Document ID: 500CMY20202205EN
Page 57
Advertisement
Table of Contents
