6.1.4.2 Steering maintenance
•
Check the couplings, mountings and bearings.
•
For the maintenance of the steering system, see the manufacturer's instructions.
6.1.5 Starting the engine
See the engine manufacturer's manual for engine information.
1. Set the engine lever in neutral.
2. Turn the ignition on and check the fuel level.
3. Start the engine by turning the ignition key.
4. Check that the gauges for oil pressure and volt meter show normal values.
5. Run the engine to operating temperature at idling speed. Never rev up a cold engine.
Risk of carbon monoxide poisoning.
DANGER
Be aware of the risks with engine exhausts. For example, under turbulence or
disadvantageous wind conditions, exhaust can enter the boat. If this happens,
avoid idling the engines. If these problems occur under way, do not open the
hatches and ventilators, as it can worsen the problems. Instead, you may try
solving the problems by changing the boat's speed or weight distribution.
Never step onto the swim ladder when the engine is running. Stop the engine
WARNING
while the steering and propeller are being inspected.
Do not operate this boat with an engine that exceeds the maximum engine power
WARNING
recommended by the manufacturer.
6.2 Swivel seat - Driver and passenger seats
The driver and passenger seats are operated with the locking handle.
The locking handle must be in the locked position when the boat speed exceeds 5 knots.
Brabus Shadow 500 Cabin 2020
Owner's Manual
© 2022 Axopar Boats / Brabus Marine
-
-
6 Operation
Document ID: 500CMY20202205EN
Page 46