Inspecting The Boat; Checklist: Regular Inspection Before Leaving Harbor - BRABUS SHADOW Owner's Manual

500 cabin
Table of Contents

Advertisement

(1)
Moving locking handle
(2)
Rotation locking handle
In the moving function, lift the locking handle up to release the lock.
This allows you to move seat from back to front.
In the rotating function, press the locking handle down to release the lock.
This allows you to rotate the seat on the post.
The locking handle must be in the locked position before boat speed exceed 5
DANGER
knots.

6.3 Inspecting the boat

Due to safety reasons, the below listed inspections must be carried out before and after using the boat.

6.3.1 Checklist: Regular inspection before leaving harbor

Safety
Make sure that:
All the people onboard have life jackets.
The wind and wave conditions do not exceed the design category of the boat.
The dead man's switch is switched to driver.
There is a fire extinguisher (or several) onboard and their approval/inspection date has not
expired.
The needed ropes and anchor are onboard.
Brabus Shadow 500 Cabin 2020
Owner's Manual
© 2022 Axopar Boats / Brabus Marine
-
-
6 Operation
Document ID: 500CMY20202205EN
Page 47

Advertisement

Table of Contents
loading

This manual is also suitable for:

Shadow 500 cabin

Table of Contents