Casio fx-9860G AU User Manual page 573

Message
Memory • Operation or memory storage
ERROR operation exceeds remaining
memory capacity.
Argument • Incorrect argument specification
ERROR for a command that requires an
argument.
Dimension • Illegal dimension used during
ERROR matrix or list calculations.
1 Input of an improper V-Window
Range ERROR
value.
2 V-Window range settings
exceeded when a graph is
redrawn.
3 Input of an improper value on the
range screen and use of that
value for execution.
4 The spreadsheet cell range was
exceeded by paste, recall, or
other cell operation.
Condition • Execution of a calculation or
ERROR function before all conditions
required for execution are met.
Non-Real • Calculation that produces a
ERROR complex number when Real is
specified for the Complex Mode
setting on the Setup screen, even
though the argument is a real
number.
Complex • List containing complex number
Number In List used in a calculation or operation
for which complex number data is
invalid.
Can't Solve! • A Solve calculation could not
Adjust initial obtain a solution within the
value or specified range.
bounds. Then
try again
-1-2
Error Message Table
Meaning
20050401
Countermeasure
• Keep the number of memories
you use within the currently
specified number of memories.
• Simplify the data you are trying
to store to keep it within the
available memory capacity.
• Delete no longer needed data
to make room for the new data.
• Correct the argument.
• Check the matrix or list
dimension.
1 Change the V-Window value so
it is within range.
2 Redraw using the proper
settings.
3 Input a proper range value.
4 Repeat the procedure taking
care that the cell range is not
exceeded.
• Check the conditions and make
any necessary corrections.
• Change the Complex Mode
setting to something other than
Real.
• Change all data in the list to
real numbers.
• Change the specified range.
• Correct the input expression.