11-4 Reset
1. While the initial SYSTEM mode screen is displayed, press 5(RSET) to display the
Reset Screen 1.
• 1(STUP) ... {setup initialization}
• 2(MAIN) ... {main memory data clear}
• 3(ADD) ... {add-in application clear}
• 4(SMEM) ... {storage memory data clear}
• 5(A&S) ... {add-in application and storage memory data clear}
Pressing 6(g) on the above screen displays the Reset Screen 2 shown below.
• 1(M&S) ... {main memory data and storage memory data clear}
• 2(ALL) ... {all memory clear}
The following table shows the functions of the function keys. You can use the function
keys to delete the specific data you want.
Function Key Functions
1(STUP)
2(MAIN)
3(ADD)
4(SMEM)
5(A&S)
6(g)1(M&S)
6(g)2(ALL)
11-4-1
Reset
Initialize Setup
Delete Main
Information
Memory Data
20050901
20050401
Delete Storage Memory
Delete Add-in
Data (Excluding Add-in
Applications
Applications)