Christie DS Series User Manual page 8

Hide thumbs Also See for DS Series:

Firmware update of the projector

NOTE • Do not operate the browser during the firmware update.

• The update may not be performed correctly if the device you are using goes

to sleep mode during the firmware update.

• The projector cannot be controlled or its settings cannot be changed from the

web screen during the firmware update.

• The firmware can also be updated by using a USB storage device. The update

by Web Control cannot be performed during the update by using a USB storage

device.

• The firmware update cannot be executed when STANDBY MODE in the

SETUP menu is set to NETWORK-WOL and the projector is in standby mode

(light source is not turned on).

Set STANDBY MODE to NORMAL or QUICK START, or turn on the power and

make sure the light source is on to execute the update.

• The firmware update cannot be executed when the shutter function of the

projector is on. Please execute the firmware update with the shutter function off.

LWU1200-DS

User's Manual - Firmware upgrade of the projector

020-001901-01 Rev. 1 (01-2021)

LIT MAN USR LWU1200-DS Upgrade

Lwu1200-ds